Elevated hides

On many occasions we are asked to manufacture and constuct elevated bird hides as can be seen from the photos on the right hand side of this page



The bases of these elevated hides can
either be a concrete base with galvanised     Ebro_Delta_Ignasi_3A.jpg
brackets to fasten the elevated section
to the concrete or use of piles if the
ground is very soft 

Ground posts can also be used that are concreted into the ground if the ground is considered firm enough to support the bird hide


In the case of the Island Mere hide at Minsmere then steel case driven piles were used and the elevated sections bolted directly to the pile caps.


 Minsmere_baseA.jpgOn the Bittern hide also at Minsmere    
piles were driven into the ground and
a concrete ring cast over the pile
caps and then the elevated section
bolted down to the concrete ring beam
as can be seen on the photos


stodmarsh J.jpg



Blacktoft Hide A.jpg

Blacktoft Hide B.jpg


Blacktoft Hide C.jpg

Tel: +44 (0) 1724 798344 | Fax +44 (0) 1724 798667 | Mobile (07774) 131496 | E-mail: info(at)bird-hides.co.uk
VAT Reg No 128 9902 39 - Company Reg No. 06750116